Fully Synthetic Motor Oil
CNPC Lubricant Oil KCR Heavy Duty Screw Air Compressor Oil Kunlun Factory
Viscosity Grade and Type
Product brand: 32, 46
Technical specifications
Execution standard: OSY RH2033-2001 (2009)
Meets standard: ISO 6743-3
Applications
Kunlun KCR Heavy Duty Screw Air Compressor Oil is suitable for cooling and lubricating all kinds of light and medium load screw air compressors. The oil also suits for screw air compressors such as Ingersoll-Rand, CompAir, Altas, Quincy Compressors and Fusheng, etc. It can provide good protection for the equipment and extend the oil drain interval. This product has been applied in Wuxi Compressor Co., Ltd.
Application Cases
Kunlun KCR Heavy Duty Screw Air Compressor Oil is used in Wuxi Compressor Co., Ltd.
Features
|
Features |
Advantages and potential benefits |
|
Excellent oxidation stability and thermal stability |
Not easy to form sludge and carbon deposits, reducing maintenance and prolonging the service life of oil products |
|
Excellent extreme pressure and anti-wear performance |
Ensure normal lubrication of equipment and extend the service life of moving parts |
|
Excellent rust and corrosion resistance performance |
Helps to improve the service life of compressor components |
|
Lower foam propensity |
Avoid generating more foam and prevent cavitation on the surface of screw components |
|
Good anti emulsification performance |
Ensure rapid separation from water contact to ensure efficient operation of the equipment |
Typical Data
|
Items |
Typical Data |
Testing Methods |
|
|
Viscosity Grade |
32 |
46 |
GB/T 3141 |
|
Kinematic Viscosity (40℃), mm2/s |
30.15 |
45.40 |
GB/T265 |
|
Kinematic Viscosity (100℃), mm2/s |
5.511 |
7.194 |
GB/T265 |
|
Viscosity Index |
121 |
119 |
GB/T1995 |
|
Flash Point, ℃ |
242 |
262 |
GB/T3536 |
|
Pour Point, ℃ |
-21 |
-21 |
GB/T3535 |
|
Total Acid number, mg KOH/g |
0.18 |
0.18 |
GB/T 4945 |
|
Copper Strip Corrosion, 3 h, 100 ℃, Rating |
1b |
1b |
GB/T5096 |
|
Emulsion, Time to 3 ml Emulsion, 54℃, min |
10 |
15 |
GB/T7305 |
|
Foam Tendency/Stability, ml/ml Sequence I （24℃） |
10/0 |
20/0 |
GB/T12579 |
|
Rust Characteristics, Procedure A |
Pass |
Pass |
GB/T11143 |
Packaging and Storage
Execute standard NB/SH/T 0164 of packing, mark, transportation, storage and final acceptance.
200L Packaging, 170±2Kg net.
Notes
- The product must be labeled clearly and properly during the entire transportation process to prevent confusion with other kinds of petroleum product.
- The product must be stored in dedicated storage tanks/equipment and recommended to be stored in an indoor and controlled environment.
- The storage tank/equipment must be waterproof, moisture-proof, and free from other mechanical particles.
- All storage equipment, tanks, pipelines, valves, etc. must be thoroughly cleaned and inspected before use to prevent contamination.
Health and Safety
- Health and Safety recommendations for this product can be found on the Chemical Material Safety Data Sheet (SDS).