Kunlun L-DRA 68 Plus Refrigeration Oil - 170kg Drum
Features and Benefits
| Feature | Advantages and potential benefits |
|---|---|
| Suitable refrigerant | Ammonia (R717) |
| Good low-temperature performance | Supports reliable operation when refrigeration equipment moves between higher- and lower-temperature working zones. |
| Good high-temperature performance | Helps avoid the formation of deposits and sludge. |
| Good oxidation and thermal stability | Helps provide long service life. |
| Good lubricity | Provides effective oil-film protection and supports lubrication and heat dissipation. |
| SGS certified as stated in the product manual | SGS certified, as stated in the product manual. |
Typical Data
| Property | L-DRA 68 Plus | Test method |
|---|---|---|
| Product grade | L-DRA 68 Plus | — |
| Kinematic viscosity at 40°C | 68.5 mm²/s | GB/T 265 |
| Pour point | -27°C | GB/T 3535 |
| Flash point (open cup) | 205°C | GB/T 3536 |
| Density at 20°C | 896 kg/m³ | SH/T 0604 |
| Acid value | 0.01 mg KOH/g | GB/T 4945 |
| Water content | 16 mg/kg | SH/T 0207 |
| Color | <0.5 | GB/T 6540 |
| Mechanical impurities | None | GB/T 511 |
| Foam tendency/stability at 24°C | 20/0 mL/mL | GB/T 12579 |
| Ash, mass fraction | <0.002% | GB/T 508 |
| Carbon residue, mass fraction | <0.01% | GB/T 268 |
| Copper strip corrosion (100°C, 3 h) | 1b | GB/T 5096 |
| Oxidation stability (140°C, 14 h): acid value | 0.02 mg KOH/g | SH/T 0196 |
| Oxidation stability (140°C, 14 h): sediment | 0.006% | SH/T 0196 |
| Falex A failure load | 2930 N | SH/T 0187 |
| Rotating pressure vessel oxidation induction period | >400 min | ASTM D2272 |
| Ammonia resistance (120°C, 168 h): color | 0.5 | NB/SH/T 0937 |
Packaging and Storage
- Packaging: 170 kg steel drum. Keep the container sealed and protect the product from contamination and moisture.
Notes
- Selection should be confirmed against the refrigerant, compressor type and equipment manufacturer's requirements. Do not mix with incompatible oils unless compatibility has been confirmed.
Health and Safety
- Refer to the product safety data sheet and applicable site safety procedures. Avoid prolonged or repeated skin contact. Collect used oil and packaging for appropriate disposal.
Product Details
Standards: Q/SYRH 2285-2013; GB/T 16630-2012; DIN 51503-1; JIS K2211; BS 2626; SGS certification (as stated in the product manual). Application: Ammonia (R717) industrial and commercial refrigeration equipment, especially open and semi-hermetic refrigeration units with evaporating temperature above -30°C.












