KunLun KL GR01 Anti-Rust Emulsified Oil (D) - 170kg Drum
Features and Benefits
| Feature | Benefit |
|---|---|
| Excellent anti-rust protection | Protects workpieces and equipment from corrosion during machining and short-term in-process storage. |
| Effective lubrication | Reduces friction between tool and workpiece, extending tool life and improving surface finish. |
| Good cooling and cleaning | Rapidly removes heat from the cutting zone and flushes away chips to maintain machining accuracy. |
| Stable emulsion | Forms a stable milky emulsion in water with good resistance to phase separation under normal water quality. |
| Easy to use, water-soluble | Dilute with water before use; flexible concentration for both cutting and grinding operations. |
| Multi-metal compatibility | Suitable for ferrous metals including carbon steel, cast iron and alloy steel. |
Typical Data
| Parameter | Value | Test method |
|---|---|---|
| Product grade | KL GR01 Anti-Rust Emulsified Oil (D) | — |
| Product type | Water-soluble anti-rust emulsified metalworking fluid | — |
| Concentrate appearance | Brownish oily liquid | Visual |
| Emulsion appearance | Milky white emulsion | Visual |
| Emulsion pH (working solution) | 8.5 – 10.0 | GB/T 6144 |
| Emulsion stability (24 h) | Soap ≤ 0.5 mL; no free oil | SH/T 0365 |
| Anti-rust test, cast iron (35±2°C) | Pass, single plate 24 h | GB/T 6144 |
| Corrosion test, full immersion (55±2°C) | Steel / copper / aluminum pass | GB/T 6144 |
| Recommended dilution | Cutting 5–10%, grinding 3–5% | — |
| Net content | 170 kg | — |
Packaging and Storage
- Packaging: 200L steel drum, 170kg net weight
- Packing, marking, transportation and storage follow the applicable industry regulations
- Store indoors in a dry, cool and well-ventilated place; keep away from direct sunlight, rain and moisture
- Recommended storage temperature: 5°C to 35°C
- Keep the container tightly sealed when not in use
- Shelf life: 2 years under normal storage conditions
Notes
- Dilute with clean water before use; add water first, then the concentrate, and stir until fully emulsified
- Recommended concentration: 5%–10% for cutting and 3%–5% for grinding; adjust to the specific operation
- Clean the sump, machine table, fixtures and chips before charging fresh fluid
- Maintain the recommended concentration when topping up the system
- Do not mix with other metalworking fluids
Health and Safety
- Health and safety recommendations for this product are provided in the Safety Data Sheet (SDS)
- Avoid prolonged or repeated skin contact; wear protective gloves and eye protection
- Wash hands thoroughly after handling and before eating or drinking
- Keep away from food, drink and animal feed
- Dispose of waste fluid and containers in accordance with local environmental regulations
- This product is classified as a non-hazardous chemical












