KunLun KL GRC-1800 Semi-Synthetic Cutting Fluid - 15kg Pail
Features and Benefits
| Feature | Benefit |
|---|---|
| Excellent cooling | Rapidly removes heat from the cutting zone to prevent workpiece deformation and thermal damage. |
| Effective lubrication | Reduces friction between tool and workpiece, extending tool life and improving surface finish. |
| Reliable anti-rust protection | Protects workpieces and machine parts from corrosion during machining and in-process storage. |
| Good foam control | Low-foaming formula keeps the fluid circulating and maintains machining accuracy. |
| Stable semi-synthetic solution | Forms a stable translucent solution in water with good cleaning and chip-removal performance. |
| Wide application | Suitable for metal cutting and grinding on carbon steel, cast iron and alloy steel. |
Typical Data
| Parameter | Value | Test method |
|---|---|---|
| Product grade | KL GRC-1800 Semi-Synthetic Cutting Fluid | — |
| Product type | Water-soluble semi-synthetic metalworking fluid | — |
| Concentrate appearance | Homogeneous liquid, no separation or sediment | Visual |
| Diluted solution appearance | Translucent to semi-transparent | Visual |
| pH value | 8.0 – 10.0 | GB/T 6144 |
| Foam control | ≤ 2 mL / 10 min | GB/T 6144 |
| Surface tension | ≤ 40 mN/m | GB/T 6144 |
| Corrosion test, full immersion (55±2°C) | Cast iron 24 h, copper 8 h, aluminum 8 h | GB/T 6144 |
| Rust prevention, cast iron (35±2°C) | Pass, single plate 24 h | GB/T 6144 |
| Recommended dilution | Cutting 5–10%, grinding 3–5% | — |
| Net content | 15 kg | — |
Packaging and Storage
- Packaging: 15kg pail
- Packing, marking, transportation and storage follow the applicable industry regulations
- Store indoors in a dry, cool and well-ventilated place; keep away from direct sunlight, rain and moisture
- Recommended storage temperature: 5°C to 35°C
- Keep the container tightly sealed when not in use
- Shelf life: 1 year minimum under normal storage conditions
Notes
- Dilute with clean water before use; add water first, then the concentrate, and stir until fully mixed
- Recommended concentration: 5%–10% for cutting and 3%–5% for grinding; adjust to the specific operation
- Clean the sump, machine table, fixtures and chips before charging fresh fluid
- Maintain the recommended concentration when topping up the system
- Do not mix with other metalworking fluids
Health and Safety
- Health and safety recommendations for this product are provided in the Safety Data Sheet (SDS)
- Avoid prolonged or repeated skin contact; wear protective gloves and eye protection
- Wash hands thoroughly after handling and before eating or drinking
- Keep away from food, drink and animal feed
- Dispose of waste fluid and containers in accordance with local environmental regulations












