English
Leave Your Message
7018 High Speed Bearings Grease
Machines and construction machines grease
Products Categories
Featured Products

KunLun KL GRC-1800 Semi-Synthetic Cutting Fluid - 15kg Pail

KunLun KL GRC-1800 Semi-Synthetic Cutting Fluid is a premium water-soluble metalworking fluid from PetroChina Lubricant Company. It provides excellent cooling, lubrication and anti-rust protection and forms a stable translucent solution when diluted with water. Suitable for metal cutting and grinding operations, it protects workpieces and machine parts while maintaining machining accuracy. Supplied in 15kg pails.

Features and Benefits

FeatureBenefit
Excellent coolingRapidly removes heat from the cutting zone to prevent workpiece deformation and thermal damage.
Effective lubricationReduces friction between tool and workpiece, extending tool life and improving surface finish.
Reliable anti-rust protectionProtects workpieces and machine parts from corrosion during machining and in-process storage.
Good foam controlLow-foaming formula keeps the fluid circulating and maintains machining accuracy.
Stable semi-synthetic solutionForms a stable translucent solution in water with good cleaning and chip-removal performance.
Wide applicationSuitable for metal cutting and grinding on carbon steel, cast iron and alloy steel.

Typical Data

ParameterValueTest method
Product gradeKL GRC-1800 Semi-Synthetic Cutting Fluid—
Product typeWater-soluble semi-synthetic metalworking fluid—
Concentrate appearanceHomogeneous liquid, no separation or sedimentVisual
Diluted solution appearanceTranslucent to semi-transparentVisual
pH value8.0 – 10.0GB/T 6144
Foam control≤ 2 mL / 10 minGB/T 6144
Surface tension≤ 40 mN/mGB/T 6144
Corrosion test, full immersion (55±2°C)Cast iron 24 h, copper 8 h, aluminum 8 hGB/T 6144
Rust prevention, cast iron (35±2°C)Pass, single plate 24 hGB/T 6144
Recommended dilutionCutting 5–10%, grinding 3–5%—
Net content15 kg—

Packaging and Storage

  • Packaging: 15kg pail
  • Packing, marking, transportation and storage follow the applicable industry regulations
  • Store indoors in a dry, cool and well-ventilated place; keep away from direct sunlight, rain and moisture
  • Recommended storage temperature: 5°C to 35°C
  • Keep the container tightly sealed when not in use
  • Shelf life: 1 year minimum under normal storage conditions

Notes

  • Dilute with clean water before use; add water first, then the concentrate, and stir until fully mixed
  • Recommended concentration: 5%–10% for cutting and 3%–5% for grinding; adjust to the specific operation
  • Clean the sump, machine table, fixtures and chips before charging fresh fluid
  • Maintain the recommended concentration when topping up the system
  • Do not mix with other metalworking fluids

Health and Safety

  • Health and safety recommendations for this product are provided in the Safety Data Sheet (SDS)
  • Avoid prolonged or repeated skin contact; wear protective gloves and eye protection
  • Wash hands thoroughly after handling and before eating or drinking
  • Keep away from food, drink and animal feed
  • Dispose of waste fluid and containers in accordance with local environmental regulations

Leave Your Message