English
Leave Your Message
CNPC Grease Low Temperature Lithium Base Grease Kunlun Factory
General purpose grease
Products Categories
Featured Products

KunLun KI40DX Electric Locomotive Transformer Oil 170kg

Naphthenic mineral base oil with antioxidant compound additives; electrical insulating oil for high-power electric locomotive traction/main transformers and similar electrical equipment. Provides electrical insulation, heat dissipation and heat transfer.

Features and Benefits

ParameterValueUnit / Method
CompositionNaphthenic mineral base oil; antioxidant compound additives; electrical insulating oil.Electrical insulating oil for transformer service
FunctionsElectrical insulation; heat dissipation; heat transfer.Supports cooling and heat transfer in service
ApplicationsHigh-power electric locomotive traction/main transformers and similar electrical equipment.Transformer insulation and cooling

Typical Data

ParameterValueUnit / Method
Density at 20°C871.6kg/m³
Kinematic viscosity at 40°C9.366mm²/s
Kinematic viscosity at 87°C2.954mm²/s
Kinematic viscosity at -30°C1475mm²/s
Pour point-48°C
Closed cup flash point142°C
Breakdown voltage (2.5 mm)67kV
Dielectric dissipation factor (90°C)0.0005Not specified in available product data
Acid value0.01mgKOH/g
Water22mg/kg
Interfacial tension49mN/m
Antioxidant0.30%
Corrosive sulfurNon-corrosive sulfurNot specified in available product data
2-Furfural<0.1mg/kg
PCBNot detectedNot specified in available product data
Heat capacity (87°C)2.262kWs/(kg·K)
Thermal conductivity (87°C)0.1070W/(m·K)
Thermal expansion coefficient (20–90°C)0.000761/K
Acid value after oxidation0.06mgKOH/g
Sediment after oxidation0.001%
Dielectric dissipation factor after oxidation0.0053Not specified in available product data
Gassing tendency28.7mm³/min
Standards / requirementsRH 09 ZB.0011-2010; IEC 60296-2003 Class I; ASTM D3487-09 Type II; Siemens TUN 901293 Edition 2006-07Not specified in available product data

Packaging and Storage

  • Handle according to applicable transformer-oil safety procedures. Keep containers closed and the product away from ignition sources and incompatible materials; prevent environmental release. Consult the current SDS and valid test report before use.

Notes

  • Historical public typical data only; not a quality guarantee for the current batch. Do not claim compliance with IEC 60296-2012; obtain a valid test report for current export/tender use. Comparator products are listed only as performance-equivalent references and are not claimed to be unconditional replacements or suitable for mixing. Do not mix with engine oil, hydraulic oil, gear oil or other oils. Maintain and test periodically according to transformer-oil maintenance standards.

Health and Safety

  • Packaging: 170 kg/drum.
  • Keep dry and clean; avoid moisture, solid particles and fiber contamination. Prefer indoor storage; if stored outdoors, protect from rain. Use dedicated storage containers. The manual also mentions 200 L or bulk information; these sources are distinguished from the user-specified 170 kg/drum and are not treated as current manufacturer-confirmed distributor packaging.

Leave Your Message