English
Leave Your Message
CNPC Lubricant Oil L-DAB Air Compressor Oil Kunlun Factory
Vacuum pump oil
Products Categories
Featured Products

KunLun Tianwei GL-5 80W-90 Heavy-Duty Vehicle Gear Oil - 16 kg Pail

KunLun Tianwei GL-5 80W-90 heavy-duty vehicle gear oil supplied in a 16 kg pail. An API GL-5 automotive gear oil formulated for hypoid gears and other heavy-duty automotive transmission gears, offering excellent extreme-pressure and anti-wear performance, good thermal and oxidation stability, effective rust and corrosion protection and superior low-temperature performance. Recommended for the lubrication of drive axles and heavy-duty transmission gears in commercial vehicles.

Features and Benefits

FeatureBenefit
Excellent extreme-pressure and anti-wear performanceProtects hypoid gear surfaces against scoring, wear and seizure under high torque and shock-load conditions.
Good thermal and oxidation stabilityResists sludge, varnish and deposit formation, keeping gear teeth clean and extending gear and bearing service life.
Effective rust and corrosion protectionGuards drive-axle components against rust and corrosion, including in humid and wet operating conditions.
Superior low-temperature performanceMaintains fluidity at low ambient temperatures for easy cold starting and reliable lubrication during warm-up.
Heavy-duty drive axle coverageFormulated for hypoid gears and other heavy-duty automotive transmission gears.

Typical Data

ItemSpecification
Brand / seriesKunLun Tianwei
Product typeHeavy-duty vehicle gear oil (automotive gear oil)
Quality gradeAPI GL-5
SAE viscosity grade80W-90
Executive standardGB 13895-2018
Standards metAPI GL-5; US MIL-L-2105D
OEM approvalEATON differential gear oil certification (manufacturer product data)
AppearanceYellow-brown transparent liquid
Flash point (open cup), °C≥180 (manufacturer SDS value for the 80W-90 grade)
Mechanical impurities, %≤0.05
Water content, %≤0.03
Kinematic viscosity / pour pointNot published for this grade in the reviewed manufacturer sources; refer to the current PDS or batch test certificate
Packaging16 kg pail

Packaging and Storage

  • Packed in 16 kg pails; 3.5 kg, 14 kg and 170 kg packaging are also available on request.
  • Store in a cool, dry and well-ventilated place with the container tightly closed.
  • Keep away from open flame, heat sources and strong oxidising agents.
  • Use clean, dedicated containers and keep the oil free of water, dust and mechanical impurities.
  • Do not mix with other types or grades of gear oil.

Notes

  • Do not mix with other types or grades of gear oil.
  • Avoid prolonged or repeated skin contact; wear oil-resistant gloves and safety goggles.
  • The product is a combustible liquid with an open-cup flash point of at least 180 °C; keep away from ignition sources.
  • Do not cut, weld or heat empty containers.
  • Dispose of empty packaging and used oil through licensed recyclers.

Health and Safety

  • Avoid contact with eyes and skin. In case of contact, wash thoroughly with plenty of water and soap.
  • Do not ingest. If swallowed, do not induce vomiting and seek medical advice immediately.
  • Use with adequate ventilation and avoid breathing oil mist.
  • Collect used oil and empty packaging for authorised recycling; never discharge into drains, soil or water.
  • Refer to the product safety data sheet (SDS) for full handling and disposal information.

Leave Your Message