English
Leave Your Message
CNPC Lubricant Oil L-TSA Turbine Oil (Grade B) Kunlun Factory
Turbine Oil
Products Categories
Featured Products

Kunlun L-KTP 32 Premium Oxidation & Rust-Inhibited Turbine Oil - 170 kg Drum

Kunlun L-KTP 32 is a premium oxidation- and rust-inhibited turbine oil for medium-load steam turbines, low-load gas turbines, water turbines, centrifugal compressors and blowers without gear transmission. Suitable for bearing temperatures of 60–95°C where the equipment manufacturer specifies this oil type and viscosity grade. Supplied in a 170 kg drum.

Features and Benefits

FeatureAdvantages and potential benefits
Oxidation resistanceHelps maintain oil performance during prolonged turbine service.
Rust protectionHelps protect turbine lubrication systems from rust.
Rapid air releaseHelps reduce deposits associated with compression of entrained air bubbles.
FilterabilitySupports effective filtration and helps reduce filter replacement frequency.
Water separationHelps separate water entering the lubrication system.
Long oxidation lifeSupports extended oil service intervals when confirmed by oil condition monitoring.

Typical Data

PropertyL-KTP 32Test method
ISO viscosity grade32—
Kinematic viscosity at 40°C, mm²/s31.46GB/T 265
Viscosity index106GB/T 2541
Acid number, mg KOH/g0.09GB/T 4945
Demulsibility at 54°C, min6GB/T 7305
Foaming tendency/stability at 24°C, mL/mL10/0GB/T 12579
Foaming tendency/stability at 93°C, mL/mL20/0GB/T 12579
Foaming tendency/stability after cooling to 24°C, mL/mL10/0GB/T 12579
Copper corrosion at 100°C for 3 h, rating1bGB/T 5096
Rust prevention, synthetic sea waterNo rustGB/T 11143, Method B
Air release at 50°C, min2.2SH/T 0308
Rotating pressure vessel oxidation, min440—
Oxidation stability, time to acid number 2.0 mg KOH/g, h5500—

Packaging and Storage

  • 170 kg net weight per steel drum.
  • Keep containers dedicated to this product, tightly sealed and protected from water, moisture and mechanical impurities.
  • Store indoors or in a controlled environment whenever possible.

Notes

  • Select the appropriate oil type and viscosity grade according to the equipment manufacturer’s instructions.
  • Do not mix different types of turbine oil.
  • Clean and inspect containers, tanks, pipes and valves before filling.
  • Typical data are from the Kunlun Turbine Oil Series brochure (2014), KTP 32 column; they are reference values, not batch acceptance limits. Refer to the current product data sheet and certificate of analysis for delivered product.

Health and Safety

  • Avoid prolonged or repeated skin contact. Do not ingest. Keep out of reach of children.
  • Dispose of used oil and packaging through qualified waste handlers; do not discharge into drains, water or soil.
  • Consult the current product Safety Data Sheet before handling.

Product Details

Application: units without gear transmission, typically with bearing temperatures of 60–95°C, including medium-load steam turbines, low-load gas turbines, water turbines, centrifugal compressors and blowers. Technical reference: the 2014 Kunlun Turbine Oil Series brochure lists KTP against Q/SY RH 2088-2012 and reports conformity to GB 11120 TSA (Grade B)/TSA (Grade A)/TGA, DIN 51515-1, Siemens TLV 9013 04, Alstom HTGD 90 117 V0001 X and GE GEK 46506D. These are brochure references; verify current requirements and equipment suitability before use. Source: Kunlun Turbine Oil Series brochure, 2014, section “昆仑KTP优质抗氧防锈汽轮机油”.

Leave Your Message