Fully Synthetic Motor Oil
CNPC Lubricant Oil KTA Ammonia-Resistant Turbine Oil Kunlun Factory
Viscosity Grade and Type
Product brand: 32、46、68
Specifications and Approvals
Execution standard：SH/T 0362-1996（2007）
Applications
Kunlun KTA Ammonia-Resistant Turbine Oil is suitable for lubricating and sealing centrifugal ammonia compressors in the fertilizer and chemical industries, as well as steam turbine units that come into contact with ammonia.
Application Cases
Kunlun KTA Ammonia-Resistant Turbine Oil is used in air compressors, steam turbines, gearboxes, refrigeration units, and refrigeration turbines at Sichuan Chemical Group. It is shared between the 101J air compression unit and the 105J ammonia compression unit, as well as in the Liaoning Tongda 101J air compression unit and the 105J ammonia compression unit (produced by Dresser Rand, USA).
Features
|
Feature |
Advantages and potential benefits |
|
Good viscosity-temperature performance |
Provide basic protection for the turbine |
|
Good anti-oxidation and anti-rust |
Have long life and prolong oil charge life |
|
Excellent anti-emulsification |
Ensure rapid separation in contact with water to ensure efficient operation of equipment |
|
Good air release properties |
Reduce the risk of deposits due to adiabatic compression of air bubbles |
|
Good anti-foaming properties |
Provide effective oil film protection for good lubrication and heat dissipation |
|
Excellent ammonia resistance performance |
Does not react with ammonia to form precipitates |
Typical Data
|
Items |
Typical Data |
Testing Methods |
|||
|
Viscosity Grade |
32 |
46 |
68 |
GB/T3141 |
|
|
Kinematic Viscosity (40℃), mm2/s |
31.5 |
46.3 |
68.4 |
GB/T265 |
|
|
Viscosity Index |
104 |
100 |
100 |
GB/T 1995 |
|
|
Density(20℃), g/cm3 |
867.9 |
871.6 |
875.4 |
GB/T 1884 |
|
|
Flash Point, ℃ |
224 |
228 |
256 |
GB/T 267 |
|
|
Pour Point, ℃ |
-21 |
-18 |
-18 |
GB/T 3535 |
|
|
Copper Strip Corrosion, 3 h, 100 ℃, Rating |
1a |
1a |
1a |
GB/T 5096 |
|
|
Rust Characteristics, Procedure A |
Pass |
Pass |
Pass |
GB/T 11143 |
|
|
Foam Tendency/Stability, ml/ml Sequence I （24℃） Sequence II（93.5℃） Sequence III（24℃） |
20/0 15/0 20/0 |
20/0 15/0 20/0 |
20/0 15/0 30/0 |
GB/T 12579 |
|
|
Emulsion, Time to 3 ml Emulsion, 54℃, min |
8 |
8 |
10 |
GB/T 7305 |
|
|
Cleanliness, Grade |
8 |
8 |
8 |
NAS 1638 |
|
|
Rotating Pressure Vessel Oxidation Test, min |
>300 |
>300 |
>300 |
SH/T 0193 |
|
|
Ammonia Resistance Test |
Pass |
Pass |
Pass |
SH/T 0302 |
|
|
Oxidation Stability Time for total acid number 2.0 mg KOH/g, h |
>2000 |
>2000 |
>1500 |
GB/T 12581 |
|
Packaging and Storage
Execute standard NB/SH/T 0164 of packing, mark, transportation, storage and final acceptance.
200L Packaging, 170±2Kg net.
Notes
- The product must be labeled clearly and properly during the entire transportation process to prevent confusion with other kinds of petroleum product.
- The product must be stored in dedicated storage tanks/equipment and recommended to be stored in an indoor and controlled environment.
- The storage tank/equipment must be waterproof, moisture-proof, and free from other mechanical particles.
- All storage equipment, tanks, pipelines, valves, etc. must be thoroughly cleaned and inspected before use to prevent contamination.
Health and Safety
- Health and Safety recommendations for this product can be found on the Chemical Material Safety Data Sheet (SDS).