Kunlun L-KTP 46 Premium Oxidation & Rust-Inhibited Turbine Oil - 170 kg Drum
Features and Benefits
| Feature | Advantages and potential benefits |
|---|---|
| Oxidation resistance | Helps maintain oil performance during prolonged turbine service. |
| Rust protection | Helps protect turbine lubrication systems from rust. |
| Rapid air release | Helps reduce deposits associated with compression of entrained air bubbles. |
| Filterability | Supports effective filtration and helps reduce filter replacement frequency. |
| Water separation | Helps separate water entering the lubrication system. |
| Long oxidation life | Supports extended oil service intervals when confirmed by oil condition monitoring. |
Typical Data
| Property | L-KTP 46 | Test method |
|---|---|---|
| ISO viscosity grade | 46 | — |
| Kinematic viscosity at 40°C, mm²/s | 44.38 | GB/T 265 |
| Viscosity index | 110 | GB/T 2541 |
| Acid number, mg KOH/g | 0.09 | GB/T 4945 |
| Demulsibility at 54°C, min | 8 | GB/T 7305 |
| Foaming tendency/stability at 24°C, mL/mL | 10/0 | GB/T 12579 |
| Foaming tendency/stability at 93°C, mL/mL | 20/0 | GB/T 12579 |
| Foaming tendency/stability after cooling to 24°C, mL/mL | 10/0 | GB/T 12579 |
| Copper corrosion at 100°C for 3 h, rating | 1b | GB/T 5096 |
| Rust prevention, synthetic sea water | No rust | GB/T 11143, Method B |
| Air release at 50°C, min | 3.0 | SH/T 0308 |
| Rotating pressure vessel oxidation, min | 470 | — |
| Oxidation stability, time to acid number 2.0 mg KOH/g, h | 5400 | — |
Packaging and Storage
- 170 kg net weight per steel drum.
- Keep containers dedicated to this product, tightly sealed and protected from water, moisture and mechanical impurities.
- Store indoors or in a controlled environment whenever possible.
Notes
- Select the appropriate oil type and viscosity grade according to the equipment manufacturer’s instructions.
- Do not mix different types of turbine oil.
- Clean and inspect containers, tanks, pipes and valves before filling.
- Typical data are from the Kunlun Turbine Oil Series brochure (2014), KTP 46 column; they are reference values, not batch acceptance limits. Refer to the current product data sheet and certificate of analysis for delivered product.
Health and Safety
- Avoid prolonged or repeated skin contact. Do not ingest. Keep out of reach of children.
- Dispose of used oil and packaging through qualified waste handlers; do not discharge into drains, water or soil.
- Consult the current product Safety Data Sheet before handling.
Product Details
Application: units without gear transmission, typically with bearing temperatures of 60–95°C, including medium-load steam turbines, low-load gas turbines, water turbines, centrifugal compressors and blowers.
Technical reference: the 2014 Kunlun Turbine Oil Series brochure lists KTP against Q/SY RH 2088-2012 and reports conformity to GB 11120 TSA (Grade B)/TSA (Grade A)/TGA, DIN 51515-1, Siemens TLV 9013 04, Alstom HTGD 90 117 V0001 X and GE GEK 46506D. These are brochure references; verify current requirements and equipment suitability before use.
Source: Kunlun Turbine Oil Series brochure, 2014, section “昆仑KTP优质抗氧防锈汽轮机油”.












