English
Leave Your Message
CNPC Lubricant Oil L-TSA Turbine Oil (Grade B) Kunlun Factory
Turbine Oil
Products Categories
Featured Products

Kunlun L-KTP 68 Premium Oxidation & Rust-Inhibited Turbine Oil - 170 kg Drum

Kunlun L-KTP 68 is an ISO VG 68 premium oxidation- and rust-inhibited turbine oil formulated with deeply refined mineral base oil and selected additives. It is intended for turbine bearing and governing-system lubrication where the equipment manufacturer specifies this oil type and viscosity grade. Supplied in a 170 kg drum.

Features and Benefits

FeatureAdvantages and potential benefits
Oxidation stabilityHelps maintain lubricant performance during turbine service.
Water separationHelps separate water entering the lubrication system.
Air releaseHelps remove entrained air from circulating oil.
Low foaming tendencySupports responsive operation of turbine governing systems.
Rust and corrosion protectionHelps protect ferrous and copper-containing components.

Typical Data

PropertyL-KTP 68Test method
ISO viscosity grade68—
Kinematic viscosity at 40°C, mm²/s67.82GB/T 265
Viscosity index97GB/T 1995
Pour point, °C-9GB/T 3535
Flash point (open cup), °C240GB/T 3536
Demulsibility at 54°C (40-37-3 mL), min12GB/T 7305
Foaming tendency/stability at 24°C, mL/mL10/0GB/T 12579
Foaming tendency/stability at 93°C, mL/mL20/0GB/T 12579
Foaming tendency/stability after cooling to 24°C, mL/mL10/0GB/T 12579
Rust prevention, Method BNo rustGB/T 11143
Copper corrosion at 100°C for 3 h, rating1bGB/T 5096
Air release at 50°C, min7.5SH/T 0308
Oxidation stability, time to acid number 2.0 mg KOH/g, h>2500GB/T 12581

Packaging and Storage

  • 170 kg net weight per steel drum.
  • Store sealed containers indoors or under cover in a cool, dry location, protected from moisture, contaminants and direct sunlight.

Notes

  • Select the oil type and viscosity grade specified by the equipment manufacturer.
  • Clean the equipment before an oil change. Prevent water and mechanical impurities from entering the oil.
  • Typical data are historical reference values from the Kunlun Industrial Lubricants Product Manual, page 17, KTP 68 column (edition referencing Q/SY RH 2088-2003). They are not batch acceptance limits. Refer to the current product data sheet and certificate of analysis for the supplied product.

Health and Safety

  • Avoid prolonged or repeated skin contact. Do not ingest. Keep out of reach of children.
  • Dispose of used oil and packaging through qualified waste handlers; do not discharge into drains, water or soil.
  • Consult the current product Safety Data Sheet before handling.

Product Details

Application: turbine bearings and governing systems, subject to the equipment manufacturer’s lubricant requirements. Data source: Kunlun Industrial Lubricants Product Manual, page 17, “KTP优质汽轮机油”, KTP 68 column. This historical edition references Q/SY RH 2088-2003 and GB 11120-89. Current product specifications should be confirmed from the latest manufacturer documentation.

Leave Your Message