Fully Synthetic Motor Oil
CNPC Lubricant Oil KTL Long Life Turbine Oil (Special for Nuclear Power) Kunlun Factory
Viscosity Grade and Type
Product brand: 32、46
Specifications and Approvals
Execution standard：Q/SY RH 2293-2014
Standards met：GB 11120 L-TSA (B)/ L-TSA (A)/ L-TGA
DIN 51515-1, DIN 51515-2
Siemens TLV 9013 04, TLV 9013 05
Alstom HTGD 90 117 V0001 X
GE GEK 46506D, GEK 32568f
Applications
Kunlun KTL Long Life Turbine Oil (Special for Nuclear Power) has Siemens TLV 9013 04,TLV 9013 05 and Alstom HTGD 90 117 V0001 X approvals.The product is suitable for nuclear power turbines without gearboxes and bearing temperature between 65℃ and 110℃.
Application Cases
Kunlun KTL Long Life Turbine Oil (Special for Nuclear Power) has been successfully applied in is used in CGN Daya Bay Nuclear Power Plant (Phase II), Ningde Nuclear Power Station, Hongyanhe Nuclear Power Station, CNNC Fuqing Nuclear Power Station, and Fangjiashan Nuclear Power Station.
Features
|
Feature |
Advantages and potential benefits |
|
Good viscosity-temperature performance |
Provide basic protection for the turbine |
|
Excellent anti-oxidation and anti-rust |
Have long life and prolong oil charge life |
|
Excellent anti-emulsification |
Ensure rapid separation in contact with water to ensure efficient operation of equipment |
|
Excellent air release properties |
Reduce the risk of deposits due to adiabatic compression of air bubbles |
|
Excellent filterability |
Reduce the number of times of filter changes |
Typical Data
|
Items |
Typical Data |
Testing Methods |
||
|
Viscosity Grade |
32 |
46 |
GB/T3141 |
|
|
Kinematic Viscosity (40℃), mm2/s |
30.5 |
44.3 |
GB/T265 |
|
|
Viscosity Index |
123 |
123 |
GB/T 1995 |
|
|
Density(20℃), g/cm3 |
867.9 |
871.6 |
GB/T 1884 |
|
|
Flash Point, ℃ |
224 |
230 |
GB/T 267 |
|
|
Pour Point, ℃ |
-30 |
-30 |
GB/T 3535 |
|
|
Total Acid Number, mg KOH/g |
0.11 |
0.11 |
GB/T 4945 |
|
|
Air Release (50℃), min |
2.0 |
2.1 |
SH/T 0308 |
|
|
Copper Strip Corrosion, 3 h, 100 ℃, Rating |
1a |
1a |
GB/T 5096 |
|
|
Rust Characteristics, Procedure B |
Pass |
Pass |
GB/T 11143 |
|
|
Foam Tendency/Stability, ml/ml Sequence I （24℃） Sequence II（93.5℃） Sequence III（24℃） |
20/0 15/0 20/0 |
20/0 15/0 20/0 |
GB/T 12579 |
|
|
Emulsion, Time to 3 ml Emulsion, 54℃, min |
6 |
8 |
GB/T 7305 |
|
|
Rotating Pressure Vessel Oxidation Test, min |
>1500 |
>1500 |
SH/T 0193 |
|
|
Oxidation Stability Time for total acid number 2.0 mg KOH/g, h |
>10000 |
>10000 |
GB/T 12581 |
|
Packaging and Storage
Execute standard NB/SH/T 0164 of packing, mark, transportation, storage and final acceptance.
200L Packaging, 170±2Kg net.
Notes
- The product must be labeled clearly and properly during the entire transportation process to prevent confusion with other kinds of petroleum product.
- The product must be stored in dedicated storage tanks/equipment and recommended to be stored in an indoor and controlled environment.
- The storage tank/equipment must be waterproof, moisture-proof, and free from other mechanical particles.
- All storage equipment, tanks, pipelines, valves, etc. must be thoroughly cleaned and inspected before use to prevent contamination.
Health and Safety
- Safety Data Sheet (SDS).