Fully Synthetic Motor Oil
KUNLUN KTL(EP) Extreme Pressure Long Life Turbine Oil (Special for Nuclear Power)
Viscosity Grade and Type
Product brand: 32、46
Specifications and Approvals
Execution standard：Q/SY RH 2293-2014
Standards met：GB 11120 TSE/TGE
DIN 51515-1, DIN 51515-2
Siemens TLV 9013 04, TLV 9013 05
Alstom HTGD 90 117 V0001 X
GE GEK 46506D, GEK 32568f
Applications
Kunlun KTL(EP) Extreme Pressure Long Life Turbine Oil (Special for Nuclear Power) has Siemens TLV 9013 04,TLV 9013 05 and Alstom HTGD 90 117 V0001 X approvals.The product is suitable for nuclear power steam turbines with gearboxes and bearing temperatures ranging from 65℃ to 110℃.
Application Cases
Kunlun KTL(EP) Extreme Pressure Long Life Turbine Oil (Special for Nuclear Power) is used in the China General Nuclear Power Group's Ling'ao Nuclear Power 1000MW unit.
Features
|
Feature |
Advantages and potential benefits |
|
Good viscosity-temperature performance |
Provide basic protection for the turbine |
|
Excellent anti-oxidation and anti-rust |
Have long life and prolong oil charge life |
|
Excellent anti-emulsification |
Ensure rapid separation in contact with water to ensure efficient operation of equipment |
|
Excellent air release properties |
Reduce the risk of deposits due to adiabatic compression of air bubbles |
|
Excellent filterability |
Reduce the number of times of filter changes |
|
Excellent extreme pressure and anti-wear properties |
Reduce wear and tear of equipment under harsh working conditions, ensure normal operation of the unit, reduce maintenance and replacement of equipment, and extend service life |
Typical Data
|
Items |
Typical Data |
Testing Methods |
|
|
Viscosity Grade |
32 |
46 |
GB/T3141 |
|
Kinematic Viscosity (40℃), mm2/s |
30.5 |
44.3 |
GB/T265 |
|
Viscosity Index |
123 |
123 |
GB/T 1995 |
|
Density(20℃), g/cm3 |
867.9 |
871.6 |
GB/T 1884 |
|
Flash Point, ℃ |
224 |
230 |
GB/T 267 |
|
Pour Point, ℃ |
-30 |
-30 |
GB/T 3535 |
|
Total Acid Number, mg KOH/g |
0.11 |
0.11 |
GB/T 4945 |
|
Air Release (50℃), min |
2.0 |
2.1 |
SH/T 0308 |
|
Copper Strip Corrosion, 3 h, 100 ℃, Rating |
1a |
1a |
GB/T 5096 |
|
Rust Characteristics, Procedure B |
Pass |
Pass |
GB/T 11143 |
|
Foam Tendency/Stability, ml/ml Sequence I （24℃） Sequence II（93.5℃） Sequence III（24℃） |
20/0 15/0 20/0 |
20/0 15/0 20/0 |
GB/T 12579 |
|
Emulsion, Time to 3 ml Emulsion, 54℃, min |
6 |
8 |
GB/T 7305 |
|
Rotating Pressure Vessel Oxidation Test, min |
>1500 |
>1500 |
SH/T 0193 |
|
Oxidation Stability Time for total acid number 2.0 mg KOH/g, h |
>10000 |
>10000 |
GB/T 12581 |
|
FZG Scuffing, Fail Load Stage, A/8.3/90 |
12 |
12 |
SH/T 0306 |
Packaging and Storage
Execute standard NB/SH/T 0164 of packing, mark, transportation, storage and final acceptance.
200L Packaging, 170±2Kg net.
Notes
- The product must be labeled clearly and properly during the entire transportation process to prevent confusion with other kinds of petroleum product.
- The product must be stored in dedicated storage tanks/equipment and recommended to be stored in an indoor and controlled environment.
- The storage tank/equipment must be waterproof, moisture-proof, and free from other mechanical particles.
- All storage equipment, tanks, pipelines, valves, etc. must be thoroughly cleaned and inspected before use to prevent contamination.
Health and Safety
- Health and Safety recommendations for this product can be found on the Chemical Material Safety Data Sheet (SDS).