Fully Synthetic Motor Oil
CNPVC Lubricant Oil KTGS Extreme Pressure Type Combined Cycle Turbine Oil Kunlun Factory
Viscosity Grade and Type
Product brand: 32、46
Specifications and Approvals
Execution standard：Q/SY RH 2236-2012
Standards met：GB 11120 TSA(B)/TSE/TGE/TGSE
DIN 51515-1, DIN 51515-2
Siemens TLV 9013 04, TLV 9013 05
Alstom HTGD 90 117 V0001 X
GE GEK 46506D, GEK 32568f
Applications
Kunlun KTGS Extreme Pressure Type Combined Cycle Turbine Oil has Siemens TLV 9013 04,TLV 9013 05 and Alstom HTGD 90 117 V0001 X approvals.The product is suitable for steam turbines and industrial centrifugal compressors with gearboxes and bearing temperatures ranging from 70°C to 125°C. It is commonly used in heavy-duty gas turbines, heavy-duty gas-steam combined cycle units, and centrifugal compressors.
Application Cases
Kunlun KTGS Extreme Pressure Type Combined Cycle Turbine Oil is used in the 20MW centrifugal compressor at the Gaoling Compressor Station of the West-East Gas Pipeline Project Phase II.
Features
|
Feature |
Advantages and potential benefits |
|
Good viscosity-temperature performance |
Provide basic protection for the turbine |
|
Excellent anti-oxidation and anti-rust |
Have long life and prolong oil charge life |
|
Excellent anti-emulsification |
Ensure rapid separation in contact with water to ensure efficient operation of equipment |
|
Excellent air release properties |
Reduce the risk of deposits due to adiabatic compression of air bubbles |
|
Excellent filterability |
Reduce the number of times of filter changes |
|
Excellent extreme pressure and anti-wear properties |
Reduce wear and tear of equipment under harsh working conditions, ensure normal operation of the unit, reduce maintenance and replacement of equipment, and extend service life |
Typical Data
|
Items |
Typical Data |
Testing Methods |
|
|
Viscosity Grade |
32 |
46 |
GB/T3141 |
|
Kinematic Viscosity (40℃), mm2/s |
31.7 |
44.3 |
GB/T265 |
|
Viscosity Index |
122 |
120 |
GB/T 1995 |
|
Density(20℃), g/cm3 |
867.9 |
871.6 |
GB/T 1884 |
|
Flash Point, ℃ |
224 |
230 |
GB/T 267 |
|
Pour Point, ℃ |
-33 |
-33 |
GB/T 3535 |
|
Total Acid Number, mg KOH/g |
0.11 |
0.11 |
GB/T 4945 |
|
Air Release (50℃), min |
2.6 |
3.1 |
SH/T 0308 |
|
Copper Strip Corrosion, 3 h, 100 ℃, Rating |
1a |
1a |
GB/T 5096 |
|
Rust Characteristics, Procedure B |
Pass |
Pass |
GB/T 11143 |
|
Foam Tendency/Stability, ml/ml Sequence I （24℃） Sequence II（93.5℃） Sequence III（24℃） |
20/0 15/0 20/0 |
20/0 15/0 20/0 |
GB/T 12579 |
|
Emulsion, Time to 3 ml Emulsion, 54℃, min |
6 |
6 |
GB/T 7305 |
|
Rotating Pressure Vessel Oxidation Test, min |
>1200 |
>1200 |
SH/T 0193 |
|
Oxidation Stability Time for total acid number 2.0 mg KOH/g, h |
>10000 |
>10000 |
GB/T 12581 |
|
FZG Scuffing, Fail Load Stage, A/8.3/90 |
12 |
12 |
SH/T 0306 |
Packaging and Storage
Execute standard NB/SH/T 0164 of packing, mark, transportation, storage and final acceptance.
200L Packaging, 170±2Kg net.
Notes
- The product must be labeled clearly and properly during the entire transportation process to prevent confusion with other kinds of petroleum product.
- The product must be stored in dedicated storage tanks/equipment and recommended to be stored in an indoor and controlled environment.
- The storage tank/equipment must be waterproof, moisture-proof, and free from other mechanical particles.
- All storage equipment, tanks, pipelines, valves, etc. must be thoroughly cleaned and inspected before use to prevent contamination.
Health and Safety
- Health and Safety recommendations for this product can be found on the Chemical Material Safety Data Sheet (SDS).