English
Leave Your Message
CNPC Lubricant Oil L-DAB Air Compressor Oil Kunlun Factory
Vacuum pump oil
Products Categories
Featured Products

KunLun Tianwei GL-5 85W-140 Heavy-Duty Vehicle Gear Oil - 170 kg Steel Drum

KunLun Tianwei GL-5 85W-140 heavy-duty vehicle gear oil supplied in a 170 kg steel drum. An API GL-5 automotive gear oil for hypoid gears and other heavy-duty automotive transmission gears, with high load-carrying capacity, excellent anti-wear protection, good thermal and oxidation stability and effective rust and corrosion protection. Recommended for the lubrication of drive axles and heavy-duty transmission gears in commercial vehicles, including heavily loaded trucks operating at high torque and high gear-oil temperatures.

Features and Benefits

FeatureBenefit
High load-carrying capacityMaintains a protective oil film on hypoid gear teeth under heavy loads, shock loading and high torque.
Excellent anti-wear protectionLimits scoring, pitting and wear of gear surfaces, extending gear and bearing service life.
Good thermal and oxidation stabilityResists sludge, varnish and deposit formation, keeping the gear set clean at high gear-oil temperatures.
Effective rust and corrosion protectionGuards drive-axle components against rust and corrosion, including in humid and wet operating conditions.
Heavy-duty drive axle coverageFormulated for hypoid gears and other heavy-duty automotive transmission gears, including heavily loaded axles.

Typical Data

ItemSpecification
Brand / seriesKunLun Tianwei
Product typeHeavy-duty vehicle gear oil (automotive gear oil)
Quality gradeAPI GL-5
SAE viscosity grade85W-140
Executive standardGB 13895-2018
Standards metAPI GL-5; US MIL-L-2105D
OEM approvalEATON differential gear oil certification (manufacturer product data)
AppearanceYellow-brown transparent liquid
Flash point (open cup), °C≥200 (manufacturer SDS value for the 85W-140 grade)
Mechanical impurities, %≤0.05
Water content, %≤0.03
Kinematic viscosity / pour pointNot published for this grade in the reviewed manufacturer sources; refer to the current PDS or batch test certificate
Packaging170 kg steel drum

Packaging and Storage

  • Packed in 170 kg steel drums; 3.5 kg, 14 kg and 16 kg packaging are also available on request.
  • Store in a cool, dry and well-ventilated place with the container tightly closed.
  • Keep away from open flame, heat sources and strong oxidising agents.
  • Use clean, dedicated containers and keep the oil free of water, dust and mechanical impurities.
  • Do not mix with other types or grades of gear oil.

Notes

  • Do not mix with other types or grades of gear oil.
  • Avoid prolonged or repeated skin contact; wear oil-resistant gloves and safety goggles.
  • The product is a combustible liquid with an open-cup flash point of at least 200 °C; keep away from ignition sources.
  • Do not cut, weld or heat empty containers.
  • Dispose of empty packaging and used oil through licensed recyclers.

Health and Safety

  • Avoid contact with eyes and skin. In case of contact, wash thoroughly with plenty of water and soap.
  • Do not ingest. If swallowed, do not induce vomiting and seek medical advice immediately.
  • Use with adequate ventilation and avoid breathing oil mist.
  • Collect used oil and empty packaging for authorised recycling; never discharge into drains, soil or water.
  • Refer to the product safety data sheet (SDS) for full handling and disposal information.

Leave Your Message