KunLun Tianwei GL-5 85W-90 Heavy-Duty Vehicle Gear Oil - 16 kg Pail
Features and Benefits
| Feature | Benefit |
|---|---|
| High load-carrying capacity | Maintains a protective oil film on hypoid gear teeth under heavy loads, shock loading and high torque. |
| Excellent anti-wear protection | Limits scoring, pitting and wear of gear surfaces, extending gear and bearing service life. |
| Good thermal and oxidation stability | Resists sludge, varnish and deposit formation, keeping the gear set clean at high operating temperatures. |
| Effective rust and corrosion protection | Guards drive-axle components against rust and corrosion, including in humid and wet operating conditions. |
| Heavy-duty drive axle coverage | Formulated for hypoid gears and other heavy-duty automotive transmission gears. |
Typical Data
| Item | Specification |
|---|---|
| Brand / series | KunLun Tianwei |
| Product type | Heavy-duty vehicle gear oil (automotive gear oil) |
| Quality grade | API GL-5 |
| SAE viscosity grade | 85W-90 |
| Executive standard | GB 13895-2018 |
| Standards met | API GL-5; US MIL-L-2105D |
| OEM approval | EATON differential gear oil certification (manufacturer product data) |
| Appearance | Yellow-brown transparent liquid |
| Flash point (open cup), °C | ≥180 (manufacturer SDS value for the 80W-90 / 85W-90 grades) |
| Mechanical impurities, % | ≤0.05 |
| Water content, % | ≤0.03 |
| Kinematic viscosity / pour point | Not published for this grade in the reviewed manufacturer sources; refer to the current PDS or batch test certificate |
| Packaging | 16 kg pail |
Packaging and Storage
- Packed in 16 kg pails; 3.5 kg, 14 kg and 170 kg packaging are also available on request.
- Store in a cool, dry and well-ventilated place with the container tightly closed.
- Keep away from open flame, heat sources and strong oxidising agents.
- Use clean, dedicated containers and keep the oil free of water, dust and mechanical impurities.
- Do not mix with other types or grades of gear oil.
Notes
- Do not mix with other types or grades of gear oil.
- Avoid prolonged or repeated skin contact; wear oil-resistant gloves and safety goggles.
- The product is a combustible liquid with an open-cup flash point of at least 180 °C; keep away from ignition sources.
- Do not cut, weld or heat empty containers.
- Dispose of empty packaging and used oil through licensed recyclers.
Health and Safety
- Avoid contact with eyes and skin. In case of contact, wash thoroughly with plenty of water and soap.
- Do not ingest. If swallowed, do not induce vomiting and seek medical advice immediately.
- Use with adequate ventilation and avoid breathing oil mist.
- Collect used oil and empty packaging for authorised recycling; never discharge into drains, soil or water.
- Refer to the product safety data sheet (SDS) for full handling and disposal information.












