Fully Synthetic Motor Oil
CNPC Lubricant Oil KG/PS Semi-Synthetic Heavy-duty Industrial Gear Oil Kunlun Factory
Viscosity Grade and Type
150、220、320
Specifications and Approvals
Executive standard：Q/SY 2282-2013
Other standards：AIST 224
ANSI/AGMA 9005-E02(EP)
ISO 12925-1
DIN 51517-3
Scope of Application
Suitable for heavy-duty industrial gear combinations with working temperatures of -20~120℃and short-term temperatures up to 130℃, as well as other gear systems that can cause vibration loads; If used for ordinary loads, it is beneficial to extend the service life.
Applications
Applied on the lubrication system of cement grinding shoes bearings in enterprises such as Southwest Cement and Qilian Mountain Cement; Applied on the mud pump of Bohai Drilling Engineering Company; Applied on the gearbox of reducers in enterprises such as Qinghai Golmud Zhonghao Chemical Co., Ltd. The service life of this product is 1.5 times that of L-CKD.
Features and Benefits
|
Features |
Advantages and potential benefits |
|
Excellent extreme pressure and wear resistance performance |
can effectively prevent tooth surface scratches, wear, and bonding, ensuring smooth gear operation. |
|
Excellent oxidation stability and thermal stability |
Ensure Long Service Life of Oil Products. |
|
Excellent rust and corrosion resistance |
Effectively prevent corrosion of machine parts in the event of water ingress during gear oil operation |
|
Excellent anti foam performance |
Can provide effective oil film protection, providing good lubrication and heat dissipation effects |
|
Excellent high and low temperature performance |
Excellent fluidity at low temperatures, making the equipment easy to start, and maintaining stable viscosity at high temperatures for better wear protection |
Typical Data
|
Items |
Typical Data |
Testing Methods |
||
|
Viscosity Grade |
150 |
220 |
320 |
GB/T 3141 |
|
Kinematic Viscosity (40℃), mm2/s |
158.3 |
203.6 |
328.3 |
GB/T 265 |
|
Viscosity Index |
121 |
123 |
119 |
GB/T 1995 |
|
Pour Point, ℃ |
-36 |
-30 |
-30 |
GB/T 3535 |
|
Mechanical Impurities, % |
0.002 |
0.001 |
0.001 |
GB/T 511 |
|
Water content , % |
trace |
trace |
trace |
GB/T 260 |
|
Foam, Sequence I, Tendency/Stability, ml |
0/0 |
5/0 |
0/0 |
GB/T 12579 |
|
Foam, Sequence II, Tendency/Stability, ml |
10/0 |
10/0 |
10/0 |
|
|
Foam, Sequence III, Tendency/Stability, ml |
0/0 |
5/0 |
0/0 |
|
|
Copper Strip Corrosion, 3 h, 100 ℃, Rating |
1b |
1b |
1b |
GB/T 5096 |
|
Rust Characteristics, Procedure B |
Pass |
Pass |
Pass |
GB/T 11143 |
|
Emulsion, Time to 3 ml Emulsion, 82℃, min |
11 |
13 |
15 |
GB/T 7305 |
|
Timken ,OK load, N |
267 |
267 |
267 |
SH/T 0189 |
|
FZG load bearing capacity, fail grade |
＞12 |
＞12 |
＞12 |
SH/T 0306 |
Packaging and Storage
Execute standard NB/SH/T 0164 of packing, mark, transportation, storage and final acceptance.
200L Packaging, 170Kg net.
Notes
- The product must be labeled clearly and properly during the entire transportation process to prevent confusion with other kinds of petroleum product.
- The product must be stored in dedicated storage tanks/equipment and recommended to be stored in an indoor and controlled environment.
- The storage tank/equipment must be waterproof, moisture-proof, and free from other mechanical particles.
- All storage equipment, tanks, pipelines, valves, etc. must be thoroughly cleaned and inspected before use to prevent contamination.
Health and Safety
Health and Safety recommendations for this product can be found on the Chemical Material Safety Data Sheet (SDS).