Fully Synthetic Motor Oil
CNPC Lubricant Oil L-CKD Heavy-duty Industrial Gear Oil Kunlun Factory
Viscosity Grade and Type
68、100、150、220、320、460、680
Specifications and Approvals
Executive standard：GB 5903-2011
Other standards： AIST 224
ANSI/AGMA 9005-E02(EP)
ISO 12925-1
Applications
Suitable for industrial closed gear drives with tooth surface contact stress greater than 1100MPa (1100N/mm2). Commonly used in metallurgy, steel, cement, mining, coal, fertilizer and other industries heavy load, impact, water parts of the gear system.
Features and Benefits
|
Features |
Advantages and potential benefits |
|
Excellent Viscosity-temperature property |
Provide the most basic protection for the gear |
|
Excellent Extreme pressure wear resistance |
Effectively prevent tooth surface abrasion, wear and gluing to ensure smooth gear operation |
|
Excellent Oxidative stability and thermal stability |
Ensure longer service life of oil products |
|
Excellent Anti-rust, anti-corrosion and anti-emulsification |
Effectively prevent corrosion of parts under water conditions and maintain efficient lubrication |
|
Excellent Foam resistance |
Provide effective oil film protection, good lubrication and heat dissipation |
Typical Data
|
Items |
Typical Data |
Testing Methods |
||||||
|
Viscosity Grade |
68 |
100 |
150 |
220 |
320 |
460 |
680 |
GB/T 3141 |
|
Kinematic Viscosity (40℃), mm2/s |
70.65 |
99.32 |
147.3 |
220.4 |
343.7 |
465.8 |
633.5 |
GB/T 265 |
|
Viscosity Index |
99 |
95 |
94 |
95 |
94 |
90 |
97 |
GB/T 1995 |
|
Flash Point, ℃ |
240 |
234 |
254 |
248 |
249 |
256 |
285 |
GB/T 3536 |
|
Pour Point, ℃ |
-24 |
-21 |
-18 |
-12 |
-18 |
-21 |
-15 |
GB/T 3535 |
|
Water Content, % |
Trace |
Trace |
Trace |
Trace |
Trace |
Trace |
Trace |
GB/T 260 |
|
Mechanical Impurity, % |
0.001 |
0.002 |
0.004 |
0.002 |
0.003 |
0.002 |
0.004 |
GB/T 511 |
|
Copper Strip Corrosion, 3 h, 100 ℃, Rating |
1b |
1a |
1b |
1a |
1b |
1a |
1b |
GB/T 5096 |
|
Rust Characteristics, Procedure B |
Pass |
Pass |
Pass |
Pass |
Pass |
Pass |
Pass |
GB/T 11143 |
|
Foam, Sequence I, Tendency/Stability, ml |
0/0 |
5/0 |
10/0 |
10/0 |
5/0 |
5/0 |
0/0 |
GB/T 12579 |
|
Foam, Sequence II, Tendency/Stability, ml |
30/0 |
10/0 |
5/0 |
10/0 |
10/0 |
10/0 |
0/0 |
|
|
Foam, Sequence III, Tendency/Stability, ml |
0/0 |
5/0 |
10/0 |
10/0 |
5/0 |
5/0 |
0/0 |
|
|
Emulsion, 82℃ Water in Oil, % Emulsion Layer, ml Total separated water, ml |
0.5 Trace 83.6 |
0.6 Trace 81.3 |
0.7 0.4 82.1 |
0.5 Trace 81.2 |
0.6 Trace 81.3 |
1.0 0.6 80.1 |
1.0 0.5 84.0 |
GB/T 8022 |
|
Timken OK Load, N |
267 |
267 |
267 |
267 |
267 |
267 |
267 |
GB/T 11144 |
|
FZG Scuffing Load Test [A/8.3/90] |
＞12 |
＞12 |
＞12 |
＞12 |
＞12 |
＞12 |
＞12 |
NB/SH/T 0306 |
Packaging and Storage
Execute standard NB/SH/T 0164 of packing, mark, transportation, storage and final acceptance.
200L Packaging, 170Kg net.
Notes
- The product must be labeled clearly and properly during the entire transportation process to prevent confusion with other kinds of petroleum product.
- The product must be stored in dedicated storage tanks/equipment and recommended to be stored in an indoor and controlled environment.
- The storage tank/equipment must be waterproof, moisture-proof, and free from other mechanical particles.
- All storage equipment, tanks, pipelines, valves, etc. must be thoroughly cleaned and inspected before use to prevent contamination.
Health and Safety
Health and Safety recommendations for this product can be found on the Chemical Material Safety Data Sheet (SDS).