English
Leave Your Message
CNPC Lubricant Oil L-CKD Heavy-duty Industrial Gear Oil Kunlun Factory
Industrial Gear Oil
Products Categories
Featured Products

CNPC Lubricant Oil L-CKD Heavy-duty Industrial Gear Oil Kunlun Factory

CNPC Kunlun Factory Lubricants L-CKD Heavy-duty Industrial Gear Oil is a high-quality extreme-pressure oils formulated by high quality base oils and sulphur-phosphorous extreme pressure additives. It has excellent high-load carrying capacity, oxidation stability and corrosion prevention, which can provide excellent protection for gears.

Viscosity Grade and Type

68、100、150、220、320、460、680

Specifications and Approvals

Executive standard:GB 5903-2011

Other standards: AIST 224

ANSI/AGMA 9005-E02(EP)

ISO 12925-1

Applications

Suitable for industrial closed gear drives with tooth surface contact stress greater than 1100MPa (1100N/mm2). Commonly used in metallurgy, steel, cement, mining, coal, fertilizer and other industries heavy load, impact, water parts of the gear system.

Features and Benefits

Features

Advantages and potential benefits

Excellent Viscosity-temperature property

Provide the most basic protection for the gear

Excellent Extreme pressure wear resistance

Effectively prevent tooth surface abrasion, wear and gluing to ensure smooth gear operation

Excellent Oxidative stability and thermal stability

Ensure longer service life of oil products

Excellent Anti-rust, anti-corrosion and anti-emulsification

Effectively prevent corrosion of parts under water conditions and maintain efficient lubrication

Excellent Foam resistance

Provide effective oil film protection, good lubrication and heat dissipation

Typical Data

Items

Typical Data

Testing Methods

Viscosity Grade

68

100

150

220

320

460

680

GB/T 3141

Kinematic Viscosity (40℃), mm2/s

70.65

99.32

147.3

220.4

343.7

465.8

633.5

GB/T 265

Viscosity Index

99

95

94

95

94

90

97

GB/T 1995

Flash Point, ℃

240

234

254

248

249

256

285

GB/T 3536

Pour Point, ℃

-24

-21

-18

-12

-18

-21

-15

GB/T 3535

Water Content, %              

Trace

Trace

Trace

Trace

Trace

Trace

Trace

GB/T 260

Mechanical Impurity, %           

0.001

0.002

0.004

0.002

0.003

0.002

0.004

GB/T 511

Copper Strip Corrosion, 3 h, 100 ℃, Rating

 

1b

 

1a

 

1b

 

1a

 

1b

 

1a

 

1b

GB/T 5096

Rust Characteristics, Procedure B

Pass

Pass

Pass

Pass

Pass

Pass

Pass

GB/T 11143

Foam, Sequence I, Tendency/Stability, ml

0/0

5/0

10/0

10/0

5/0

5/0

0/0

GB/T 12579

Foam, Sequence II, Tendency/Stability, ml

30/0

10/0

5/0

10/0

10/0

10/0

0/0

Foam, Sequence III, Tendency/Stability, ml

0/0

5/0

10/0

10/0

5/0

5/0

0/0

Emulsion, 82℃

Water in Oil, %            

Emulsion Layer, ml

Total separated water, ml

 

0.5

Trace

83.6

 

0.6

Trace

81.3

 

0.7

0.4

82.1

 

0.5

Trace

81.2

 

0.6

Trace

81.3

 

1.0

0.6

80.1

 

1.0

0.5

84.0

GB/T 8022

Timken OK Load, N

267

267

267

267

267

267

267

GB/T 11144

FZG Scuffing Load Test [A/8.3/90]

>12

>12

>12

>12

>12

>12

>12

NB/SH/T 0306

Packaging and Storage

Execute standard NB/SH/T 0164 of packing, mark, transportation, storage and final acceptance.

200L Packaging, 170Kg net.

Notes

  • The product must be labeled clearly and properly during the entire transportation process to prevent confusion with other kinds of petroleum product.
  • The product must be stored in dedicated storage tanks/equipment and recommended to be stored in an indoor and controlled environment.
  • The storage tank/equipment must be waterproof, moisture-proof, and free from other mechanical particles.
  • All storage equipment, tanks, pipelines, valves, etc. must be thoroughly cleaned and inspected before use to prevent contamination.

Health and Safety

Health and Safety recommendations for this product can be found on the Chemical Material Safety Data Sheet (SDS).

Leave Your Message