English
Leave Your Message
CNPC Lubricant Oil L-DAB Air Compressor Oil Kunlun Factory
Vacuum pump oil
Products Categories
Featured Products

KunLun HP-R High Temperature Grease - 15 kg Pail

KunLun HP-R high temperature grease is an NLGI 2 composite metal-soap grease supplied in a 15 kg pail. It combines a high dropping point with outstanding load-carrying capacity and good oxidation stability, giving a long service life at elevated temperatures. Recommended for the lubrication of front and rear axle bearings and other friction parts of heavy-duty trucks, engineering vehicles and buses, as well as small and medium-size motor, fan and pump bearings in industrial equipment, over a service range of -30 °C to 180 °C.

Features and Benefits

FeatureBenefit
Excellent high-temperature performanceComposite metal-soap thickener keeps a stable structure at elevated temperature with a dropping point well above general-purpose lithium grease; the grease does not flow out or throw off.
Outstanding load-carrying capacityExtreme-pressure and anti-wear additives keep a load-bearing film for high-load bearings and other heavily loaded friction parts.
Good oxidation stabilityResists oxidation and hardening, so the grease stays serviceable through long high-temperature operation.
Long service lifeRelubrication intervals are much longer than with general-purpose lithium grease.
Water resistance and corrosion protectionMaintains bearing lubrication under humid conditions and protects bearing surfaces against rust.
Vehicle and industrial application coverageFor front and rear axle bearings and friction parts of heavy-duty trucks, engineering vehicles and buses, and for small and medium-size motor, fan and pump bearings.

Typical Data

ParameterValueTest method
NLGI grade2 (T2 also available)Q/SY PR 0006
Product classificationISO 6743-9 (GB 7631.8-90): L-XCGIB 2, L-XCGIB T2-
Product standardQ/SY PR 0006 (as printed on the pail); manufacturer data also lists Q/SY RH2199-
Operating temperature range (°C)-30 to 180Q/SY PR 0006
Thickener / base oilComposite metal soap thickened mineral oil and synthetic oil-
Worked penetration (0.1 mm)Not published in the reviewed KunLun sources; refer to the current PDS or batch certificate-
Dropping point (°C)Higher than general-purpose lithium grease; the exact value is not published in the reviewed sources-
Storage period36 months from the date of production-
Packaging15 kg pail (0.8 kg can, 2 kg tin and 175 kg drum also available)-

Packaging and Storage

  • Packed in 15 kg pails; 0.8 kg cans, 2 kg tins and 175 kg drums are also available on request.
  • Keep containers sealed and clean, and reseal the pail after use.
  • Store in a cool, dry and ventilated place away from direct sunlight.
  • Avoid mixing with other greases; use clean, dedicated tools and containers.
  • Shelf life is 36 months from the date of production.

Notes

  • Do not mix with other greases.
  • Clean the bearing and the grease nipple before relubrication and avoid overfilling.
  • Avoid prolonged or repeated skin contact; wear oil-resistant gloves and safety goggles.
  • Keep away from open flame and heat sources; do not cut, weld or heat empty containers.
  • Dispose of empty packaging and used grease through licensed recyclers.

Health and Safety

  • Avoid contact with eyes and skin. In case of contact, wash thoroughly with plenty of water and soap.
  • Do not ingest. If swallowed, do not induce vomiting and seek medical advice immediately.
  • Use with adequate ventilation when working in confined or hot areas.
  • Collect used grease and empty packaging for authorised recycling; never discharge into drains, soil or water.
  • Refer to the product safety data sheet (SDS) for full handling information.

Leave Your Message