KunLun KL-D Construction Machinery Grease No. 3 - 300 g Cartridge (24 per Carton)
Features and Benefits
| Feature | Benefit |
|---|---|
| Good corrosion protection | Protects the lubricated parts against corrosion, so pins, bushes and bearings last longer on site. |
| Good oxidation resistance | Resists ageing in storage and in service, keeping the grease effective between relubrication intervals. |
| Good water resistance | Continues to lubricate properly where water is present, as on wet or washed-down construction equipment. |
| Good adhesion and mechanical stability | Stays viscous and in place instead of flowing out of open bushes and grease points. |
| Cartridge packing for fast field use | 300 g cartridges load straight into a grease gun, keeping the grease clean and cutting refill time on site. |
| Application coverage | For construction machinery, agricultural machinery and trucks, and other general machinery friction points running at low to medium speed. |
Typical Data
| Parameter | Value | Test method |
|---|---|---|
| NLGI grade | 3 | Q/SY RH 15XB·0219 |
| Product standard | Q/SY RH 15XB·0219 | - |
| Operating temperature range (°C) | -20 to 100 | Q/SY RH 15XB·0219 |
| Product classification (ISO 6743-9) | Not stated in the reviewed sources; refer to the current PDS | - |
| Thickener / base oil | Not published in the reviewed sources; refer to the current PDS | - |
| Worked penetration (0.1 mm) | Not published in the reviewed sources; refer to the current PDS or batch certificate | GB/T 269 |
| Dropping point (°C) | 160 (brand retail listing); refer to the current PDS for the certified value | GB/T 4929 |
| Water resistance | Good | - |
| Corrosion protection | Good | - |
| Adhesion and mechanical stability | Good | - |
| Packaging | 300 g cartridge, 24 cartridges per carton | - |
Packaging and Storage
- Packed in 300 g cartridges, 24 cartridges per carton.
- Store in a cool, dry and well-ventilated place with the container closed and away from sources of heat.
- Keep the cartridges sealed until they are loaded into the grease gun to avoid contamination.
- Do not mix with other greases; use clean, dedicated guns and fittings.
- Wipe the grease nipple before coupling the gun so that dirt is not pushed into the bearing.
Notes
- Do not mix with other greases.
- Clean the grease nipple and the bearing area before relubrication and avoid overfilling.
- Store cartridges upright and use them in rotation; do not use cartridges that have been left open.
- Avoid prolonged or repeated skin contact; wear oil-resistant gloves and safety goggles.
- Dispose of empty cartridges and used grease through licensed recyclers.
Health and Safety
- Use with adequate ventilation.
- Avoid prolonged or repeated skin contact; wear oil-resistant gloves.
- Avoid contact with eyes. In case of contact, wash thoroughly with plenty of water.
- Do not ingest. If swallowed, seek medical advice immediately.
- Refer to the product Safety Data Sheet (SDS) for full handling information.












