English
Leave Your Message
CNPC Lubricant Oil L-DAB Air Compressor Oil Kunlun Factory
Vacuum pump oil
Products Categories
Featured Products

KunLun KP-A General Purpose Lithium Based Grease No. 000 - 15 kg Pail

KunLun KP-A general purpose lithium based grease is an NLGI 000 semi-fluid grease supplied in a 15 kg pail. It is formulated from high-quality base oil and a lithium soap thickener, giving good lubrication and wear protection, excellent mechanical stability and good water resistance and rust prevention over a wide service temperature range. It is suitable for the general lubrication of rolling bearings, plain bearings, gears and sliding surfaces in industrial equipment and for centralised lubrication systems. Service range -20 °C to 120 °C.

Features and Benefits

FeatureBenefit
Good lubrication and wear protectionMaintains a protective film on rolling bearings, plain bearings, gears and sliding surfaces, reducing wear in normal industrial duty.
Excellent mechanical stabilityThe lithium soap structure resists softening and leakage, so the grease stays where it is applied.
Good water resistance and rust preventionProtects metal surfaces against water wash-off and rust in damp or wet working conditions.
Wide service temperature rangeCovers -20 °C to 120 °C, so one grease serves most general industrial equipment through seasonal temperature changes.
Very soft NLGI 000 consistencyPumps easily, making it suitable for centralised lubrication systems and for reaching lubricating points through long lines.
Broad general equipment coverageFor the general lubrication of rolling bearings, plain bearings, gears and sliding surfaces in industrial machinery.

Typical Data

ParameterValueTest method
NLGI grade000Q/SY RH2155
Product classificationISO 6743-9 (GB 7631.8-90): L-XBCEA 000-
Product standardQ/SY RH2155 (grades 000, 00 and 0)-
Operating temperature range (°C)-20 to 120Q/SY RH2155
Thickener / base oilLithium soap thickened high-quality mineral base oil-
ConsistencyVery soft, semi-fluid NLGI 000 grease, suitable for centralised lubrication systems-
Worked penetration (0.1 mm)445 to 475 (NLGI 000 consistency range; the measured value is not published in the reviewed KunLun sources)GB/T 269
Dropping point (°C)Not published in the reviewed KunLun sources; refer to the current PDSGB/T 4929
Water resistance and rust preventionGood (manufacturer product description)-
Packaging15 kg pail (0.8 kg can, 1 kg bag, 175 kg drum and bulk packing also available)-

Packaging and Storage

  • Packed in 15 kg pails; 0.8 kg cans, 1 kg bags, 175 kg drums and bulk packing are also available on request.
  • Store in a cool, dry and well-ventilated place, away from direct sunlight, rain and high temperatures.
  • Keep the container sealed after use and prevent the ingress of water and impurities.
  • Use clean, dedicated tools and containers; do not mix with different types of grease.
  • The very soft 000 consistency suits centralised lubrication systems as well as grease-gun and manual application.

Notes

  • Do not mix with different types of grease.
  • Clean the bearing and the grease nipple before relubrication and avoid overfilling.
  • Check the centralised lubrication system for leaks when changing to a semi-fluid 000 grade.
  • Avoid prolonged or repeated skin contact; wear oil-resistant gloves and safety goggles.
  • Dispose of empty packaging and used grease through licensed recyclers.

Health and Safety

  • Use with adequate ventilation.
  • Avoid prolonged or repeated skin contact; wear oil-resistant gloves.
  • Avoid contact with eyes. In case of contact, wash thoroughly with plenty of water.
  • Do not ingest. If swallowed, seek medical advice immediately.
  • Refer to the product Safety Data Sheet (SDS) for full handling information.

Leave Your Message