English
Leave Your Message
CNPC Lubricant Oil L-DAB Air Compressor Oil Kunlun Factory
Vacuum pump oil
Products Categories
Featured Products

KunLun KP-A General Purpose Lithium Based Grease No. 00 - 15 kg Pail

KunLun KP-A general purpose lithium based grease is an NLGI 00 semi-fluid grease supplied in a 15 kg pail. It is made from refined mineral oil thickened with lithium soap and compounded with performance additives. It delivers good mechanical stability, excellent water resistance and effective anti-wear protection with reliable lubrication in rolling and sliding bearings and other general-purpose mechanical equipment operating under normal conditions, and its semi-fluid consistency suits centralised lubrication systems. Service range -20 °C to 120 °C.

Features and Benefits

FeatureBenefit
Good mechanical stabilityThe lithium soap structure resists softening and leakage under repeated working, so the grease stays in place.
Excellent water resistanceKeeps lubricating bearings and other parts that come into contact with water or damp conditions.
Effective anti-wear protectionPerformance additives maintain a protective film on rolling and sliding bearing surfaces.
Reliable lubrication performanceConsistent quality and good pumpability give dependable lubrication in everyday general machinery duty.
Semi-fluid NLGI 00 consistencyFlows readily, making it suitable for centralised and automatic lubrication systems as well as grease-gun application.
Wide service range, -20 °C to 120 °COne grease covers general-purpose industrial and automotive friction points across different seasons and regions.

Typical Data

ParameterValueTest method
NLGI grade00Q/SY RH2155
Product classificationISO 6743-9 (GB 7631.8-90): L-XBCEA 00-
Product standardQ/SY RH2155 (grades 000, 00 and 0); the pail label prints Q/SY RH0159-
Operating temperature range (°C)-20 to 120Q/SY RH2155
Thickener / base oilLithium soap thickened refined mineral oil with performance additives-
ConsistencySemi-fluid NLGI 00 grease, suitable for centralised lubrication systems-
Worked penetration (0.1 mm)400 to 430 (NLGI 00 consistency range; the measured value is not published in the reviewed KunLun sources)GB/T 269
Dropping point (°C)Not published in the reviewed KunLun sources; refer to the current PDSGB/T 4929
Water resistanceExcellent (manufacturer product description)-
Packaging15 kg pail (0.8 kg can, 1 kg bag, 175 kg drum and bulk packing also available)-

Packaging and Storage

  • Packed in 15 kg pails; 0.8 kg cans, 1 kg bags, 175 kg drums and bulk packing are also available on request.
  • Store in a cool, dry and well-ventilated place, away from direct sunlight and heat sources.
  • Keep the container tightly closed after use and keep the grease free of dust and water.
  • Use clean, dedicated tools and containers; do not mix with other types of grease.
  • The semi-fluid 00 consistency suits centralised lubrication systems as well as grease-gun and manual application.

Notes

  • Do not mix with other greases.
  • Clean the bearing and the grease nipple before relubrication and avoid overfilling.
  • Check the centralised lubrication system for leaks when changing to a semi-fluid 00 grade.
  • Avoid prolonged or repeated skin contact; wear oil-resistant gloves and safety goggles.
  • Dispose of empty packaging and used grease through licensed recyclers.

Health and Safety

  • Use with adequate ventilation.
  • Avoid prolonged or repeated skin contact; wear oil-resistant gloves.
  • Avoid contact with eyes. In case of contact, wash thoroughly with plenty of water.
  • Do not ingest. If swallowed, seek medical advice immediately.
  • Refer to the product Safety Data Sheet (SDS) for full handling information.

Leave Your Message