KunLun KP-A General Purpose Lithium Based Grease No. 1 - 15 kg Pail
Features and Benefits
| Feature | Benefit |
|---|---|
| Good mechanical stability and load-carrying capacity | The lithium soap structure stays consistent under repeated shear and keeps a load-bearing film in bearings and gears. |
| Excellent water resistance and anti-rust performance | Can be used on parts exposed to water and damp conditions, and protects bearing surfaces against rust. |
| Good oxidation stability for a long service life | Resists hardening and oil separation, so relubrication intervals are longer than with calcium or sodium soap greases. |
| Wide service range, -20 °C to 120 °C | A single grease covers most general industrial and automotive duties across different seasons and regions. |
| Suitable for centralised lubrication systems | NLGI 1 consistency pumps easily through centralised and automated greasing lines. |
| General machinery application coverage | For rolling and sliding bearings, gears and other friction points of general industrial and automotive equipment. |
Typical Data
| Parameter | Value | Test method |
|---|---|---|
| NLGI grade | 1 | GB/T 7324 |
| Product classification | ISO 6743-9 (GB 7631.8-90): L-XBCEA 1 | - |
| Product standard | GB/T 7324-2010 | - |
| Operating temperature range (°C) | -20 to 120 | GB/T 7324 |
| Thickener / base oil | Lithium soap thickened refined mineral oil with anti-oxidation and anti-rust additives | - |
| Worked penetration (0.1 mm) | 325 | GB/T 269 |
| Dropping point (°C) | 196 | GB/T 4929 |
| Shear stability, 100,000 strokes (0.1 mm) | 335 | GB/T 269 |
| Water washout (38 °C, 1 h) (%) | 2.6 | SH/T 0109 |
| Corrosion protection (52 °C, 48 h) | Qualified | GB/T 5018 |
| Packaging | 15 kg pail (0.8 kg can, 1 kg bag, 175 kg drum and bulk packing also available) | - |
Packaging and Storage
- Packed in 15 kg pails; 0.8 kg cans, 1 kg bags, 175 kg drums and bulk packing are also available on request.
- Store in a cool, dry and well-ventilated place away from direct sunlight and heat sources.
- Keep the container tightly closed after use and keep the grease free of dust and water.
- Use clean, dedicated tools and containers; do not mix with other types of grease.
- Grade 1 is intended for centralised lubrication systems as well as grease-gun and manual application.
Notes
- Do not mix with other greases.
- Clean the bearing and the grease nipple before relubrication and avoid overfilling.
- Avoid prolonged or repeated skin contact; wear oil-resistant gloves and safety goggles.
- Keep away from open flame and heat sources; do not cut, weld or heat empty containers.
- Dispose of empty packaging and used grease through licensed recyclers.
Health and Safety
- This product is not classified as hazardous under normal use.
- Avoid contact with eyes and skin. After contact, wash with soap and water.
- Do not ingest. If swallowed, do not induce vomiting and seek medical advice immediately.
- Use with adequate ventilation when working in confined areas.
- Collect used grease and empty packaging for authorised recycling; never discharge into drains, soil or water.












