KunLun 801 Electric Power Grease - 100 g Tube
Features and Benefits
| Feature | Benefit |
|---|---|
| Low contact resistance and reduced temperature rise | Lowers resistance and temperature rise at conductor contact surfaces, cutting active power loss at bolted joints. |
| Excellent anti-galvanic corrosion and rust protection | Protects copper, aluminium and steel contact surfaces against galvanic corrosion and rust in humid, salt-fog and chemically corrosive environments. |
| Wide service range, -40 °C to 180 °C | Stays in place at high temperature without flowing out and does not crack or harden at low temperature. |
| Good oxidation and chemical stability | Resists oxidation and chemical attack, keeping the protective and conductive film effective over long service intervals. |
| Electrical joint application coverage | For bolted busbar joints, switch contacts, terminals and battery connections in power generation, transmission, distribution and supply systems. |
| Non-toxic, odourless and non-flammable | Comfortable and safe to apply by hand or with tools, and suitable for general transport. |
Typical Data
| Parameter | Value | Test method |
|---|---|---|
| NLGI grade | 2 | Q/SY RH2159 |
| Product classification | ISO 6743-9 (GB 7631.8-90) | - |
| Product standard | Q/SY RH2159 | - |
| Operating temperature range (°C) | -40 to 180 | Q/SY RH2159 |
| Base oil / thickener type | Not published in the reviewed KunLun sources; refer to the current PDS | - |
| Worked penetration (0.1 mm) | Not published in the reviewed KunLun sources; refer to the current PDS or batch certificate | - |
| Dropping point (°C) | Not published in the reviewed KunLun sources; refer to the current PDS | - |
| Electrical behaviour | Conductive contact grease for electrical joints; measured contact-resistance values are not published in the reviewed sources | - |
| Packaging | 100 g tube (0.8 kg can, 15 kg drum, 175 kg drum and bulk packing also available) | - |
Packaging and Storage
- Packed in 100 g tubes; 0.8 kg cans, 15 kg drums, 175 kg drums and bulk packing are also available on request.
- Store in a cool, dry and well-ventilated place with the container tightly closed.
- Keep away from open flame, heat sources and strong oxidising agents.
- Use clean, dedicated tools and containers; keep the grease free of water, dust and metal particles.
- Reseal the tube after use and do not mix with other types of grease.
Notes
- Clean the contact surfaces and remove oil, dust and oxide before application; apply a thin, even film and wipe off excess after bolting.
- Do not mix with other types of grease.
- Avoid prolonged or repeated skin contact; wear oil-resistant gloves and safety goggles.
- Keep away from ignition sources; do not cut, weld or heat empty containers.
- Dispose of empty packaging and used grease through licensed recyclers.
Health and Safety
- Avoid contact with eyes and skin. In case of contact, wash thoroughly with plenty of water and soap.
- Do not ingest. If swallowed, do not induce vomiting and seek medical advice immediately.
- Use with adequate ventilation when working inside enclosed switchgear or battery compartments.
- Collect used grease and empty packaging for authorised recycling; never discharge into drains, soil or water.
- Refer to the product safety data sheet (SDS) for full handling information.












