English
Leave Your Message
CNPC Lubricant Oil L-DAB Air Compressor Oil Kunlun Factory
Vacuum pump oil
Products Categories
Featured Products

KunLun KL-D Construction Machinery Grease No. 3 - 300 g Cartridge (24 per Carton)

KunLun KL-D construction machinery grease is an NLGI 3 grease packed in 300 g cartridges for grease guns and lubrication nipples on site plant. It offers good corrosion protection, good oxidation resistance and good water resistance, with good adhesion and mechanical stability so the grease stays in place without flowing out. It is intended for the lubrication and protection of friction points on construction machinery, agricultural machinery and trucks, and other general machinery operating at low to medium speed. Service range -20 °C to 100 °C.

Features and Benefits

FeatureBenefit
Good corrosion protectionProtects the lubricated parts against corrosion, so pins, bushes and bearings last longer on site.
Good oxidation resistanceResists ageing in storage and in service, keeping the grease effective between relubrication intervals.
Good water resistanceContinues to lubricate properly where water is present, as on wet or washed-down construction equipment.
Good adhesion and mechanical stabilityStays viscous and in place instead of flowing out of open bushes and grease points.
Cartridge packing for fast field use300 g cartridges load straight into a grease gun, keeping the grease clean and cutting refill time on site.
Application coverageFor construction machinery, agricultural machinery and trucks, and other general machinery friction points running at low to medium speed.

Typical Data

ParameterValueTest method
NLGI grade3Q/SY RH 15XB·0219
Product standardQ/SY RH 15XB·0219-
Operating temperature range (°C)-20 to 100Q/SY RH 15XB·0219
Product classification (ISO 6743-9)Not stated in the reviewed sources; refer to the current PDS-
Thickener / base oilNot published in the reviewed sources; refer to the current PDS-
Worked penetration (0.1 mm)Not published in the reviewed sources; refer to the current PDS or batch certificateGB/T 269
Dropping point (°C)160 (brand retail listing); refer to the current PDS for the certified valueGB/T 4929
Water resistanceGood-
Corrosion protectionGood-
Adhesion and mechanical stabilityGood-
Packaging300 g cartridge, 24 cartridges per carton-

Packaging and Storage

  • Packed in 300 g cartridges, 24 cartridges per carton.
  • Store in a cool, dry and well-ventilated place with the container closed and away from sources of heat.
  • Keep the cartridges sealed until they are loaded into the grease gun to avoid contamination.
  • Do not mix with other greases; use clean, dedicated guns and fittings.
  • Wipe the grease nipple before coupling the gun so that dirt is not pushed into the bearing.

Notes

  • Do not mix with other greases.
  • Clean the grease nipple and the bearing area before relubrication and avoid overfilling.
  • Store cartridges upright and use them in rotation; do not use cartridges that have been left open.
  • Avoid prolonged or repeated skin contact; wear oil-resistant gloves and safety goggles.
  • Dispose of empty cartridges and used grease through licensed recyclers.

Health and Safety

  • Use with adequate ventilation.
  • Avoid prolonged or repeated skin contact; wear oil-resistant gloves.
  • Avoid contact with eyes. In case of contact, wash thoroughly with plenty of water.
  • Do not ingest. If swallowed, seek medical advice immediately.
  • Refer to the product Safety Data Sheet (SDS) for full handling information.

Leave Your Message