English
Leave Your Message
CNPC Lubricant Oil L-DAB Air Compressor Oil Kunlun Factory
Vacuum pump oil
Products Categories
Featured Products

KunLun KP-A General Purpose Lithium Based Grease No. 0 - 15 kg Pail

KunLun KP-A general purpose lithium based grease is an NLGI 0 grease supplied in a 15 kg pail, formulated with refined base oil and a lithium soap thickener plus antioxidant, anti-rust and anti-wear additives. It provides good mechanical stability and excellent oxidation stability with effective anti-rust and anti-wear protection, and is suitable for the lubrication of rolling and sliding bearings in general machinery under normal operating conditions. Service range -20 °C to 120 °C.

Features and Benefits

FeatureBenefit
Good mechanical stabilityThe lithium soap structure resists softening and leakage under repeated working, so the grease stays in place.
Excellent oxidation stabilityResists oxidation and hardening, giving a longer service life and more consistent performance in storage and use.
Effective anti-rust and anti-wear protectionAntioxidant, anti-rust and anti-wear additives protect bearing surfaces against corrosion and wear.
Soft NLGI 0 consistencyFlows readily and pumps easily, making it suitable for centralised and automatic lubrication systems as well as grease-gun application.
Wide service range, -20 °C to 120 °COne grease covers the normal operating range of most general machinery through seasonal temperature changes.
General machinery application coverageFor the lubrication of rolling and sliding bearings in general machinery under normal operating conditions.

Typical Data

ParameterValueTest method
NLGI grade0Q/SY RH2155
Product classificationISO 6743-9 (GB 7631.8-90): L-XBCEA 0-
Product standardQ/SY RH2155 (grades 000, 00 and 0); the pail label prints Q/SY RH0015-
Operating temperature range (°C)-20 to 120Q/SY RH2155
Thickener / base oilLithium soap thickened refined mineral oil with antioxidant, anti-rust and anti-wear additives-
ConsistencySoft NLGI 0 grease, suitable for centralised lubrication systems-
Worked penetration (0.1 mm)355 to 385 (NLGI 0 consistency range; the measured value is not published in the reviewed KunLun sources)GB/T 269
Dropping point (°C)Not published in the reviewed KunLun sources; refer to the current PDSGB/T 4929
Anti-rust and anti-wear performanceEffective (manufacturer product description)-
Packaging15 kg pail (0.8 kg can, 1 kg bag, 175 kg drum and bulk packing also available)-

Packaging and Storage

  • Packed in 15 kg pails; 0.8 kg cans, 1 kg bags, 175 kg drums and bulk packing are also available on request.
  • Store in a cool, dry and well-ventilated place and keep the container tightly closed to prevent contamination.
  • Use clean, dedicated tools and containers; avoid mixing with other greases.
  • The soft 0 consistency suits centralised lubrication systems as well as grease-gun and manual application.
  • Clean the lubrication points before use to avoid contamination.

Notes

  • Avoid mixing with other greases.
  • Clean the bearing and the grease nipple before relubrication and avoid overfilling.
  • Check the centralised lubrication system for leaks when changing to a soft 0 grade.
  • Avoid prolonged or repeated skin contact; wear oil-resistant gloves and safety goggles.
  • Used grease shall be disposed of in accordance with local regulations.

Health and Safety

  • Refer to the product Safety Data Sheet (SDS) for detailed safety information.
  • Avoid prolonged or repeated skin contact; wear oil-resistant gloves.
  • Avoid contact with eyes. In case of contact, wash thoroughly with plenty of water.
  • Do not ingest. If swallowed, seek medical advice immediately.
  • Used grease and empty packaging shall be disposed of in accordance with local regulations.

Leave Your Message