English
Leave Your Message
CNPC Lubricant Oil L-DAB Air Compressor Oil Kunlun Factory
Vacuum pump oil
Products Categories
Featured Products

KunLun KP-A General Purpose Lithium Based Grease No. 1 - 15 kg Pail

KunLun KP-A general purpose lithium based grease is an NLGI 1 grease supplied in a 15 kg pail. It is made from high-quality mineral base oil thickened with lithium soap and fortified with anti-oxidation and anti-rust additives. It provides excellent lubrication, anti-wear protection and mechanical stability, with good water resistance and a long service life, and is suitable for the lubrication of rolling and sliding bearings, gears and other general machinery. Grade 1 is also suitable for centralised lubrication systems. Service range -20 °C to 120 °C, standard GB/T 7324.

Features and Benefits

FeatureBenefit
Good mechanical stability and load-carrying capacityThe lithium soap structure stays consistent under repeated shear and keeps a load-bearing film in bearings and gears.
Excellent water resistance and anti-rust performanceCan be used on parts exposed to water and damp conditions, and protects bearing surfaces against rust.
Good oxidation stability for a long service lifeResists hardening and oil separation, so relubrication intervals are longer than with calcium or sodium soap greases.
Wide service range, -20 °C to 120 °CA single grease covers most general industrial and automotive duties across different seasons and regions.
Suitable for centralised lubrication systemsNLGI 1 consistency pumps easily through centralised and automated greasing lines.
General machinery application coverageFor rolling and sliding bearings, gears and other friction points of general industrial and automotive equipment.

Typical Data

ParameterValueTest method
NLGI grade1GB/T 7324
Product classificationISO 6743-9 (GB 7631.8-90): L-XBCEA 1-
Product standardGB/T 7324-2010-
Operating temperature range (°C)-20 to 120GB/T 7324
Thickener / base oilLithium soap thickened refined mineral oil with anti-oxidation and anti-rust additives-
Worked penetration (0.1 mm)325GB/T 269
Dropping point (°C)196GB/T 4929
Shear stability, 100,000 strokes (0.1 mm)335GB/T 269
Water washout (38 °C, 1 h) (%)2.6SH/T 0109
Corrosion protection (52 °C, 48 h)QualifiedGB/T 5018
Packaging15 kg pail (0.8 kg can, 1 kg bag, 175 kg drum and bulk packing also available)-

Packaging and Storage

  • Packed in 15 kg pails; 0.8 kg cans, 1 kg bags, 175 kg drums and bulk packing are also available on request.
  • Store in a cool, dry and well-ventilated place away from direct sunlight and heat sources.
  • Keep the container tightly closed after use and keep the grease free of dust and water.
  • Use clean, dedicated tools and containers; do not mix with other types of grease.
  • Grade 1 is intended for centralised lubrication systems as well as grease-gun and manual application.

Notes

  • Do not mix with other greases.
  • Clean the bearing and the grease nipple before relubrication and avoid overfilling.
  • Avoid prolonged or repeated skin contact; wear oil-resistant gloves and safety goggles.
  • Keep away from open flame and heat sources; do not cut, weld or heat empty containers.
  • Dispose of empty packaging and used grease through licensed recyclers.

Health and Safety

  • This product is not classified as hazardous under normal use.
  • Avoid contact with eyes and skin. After contact, wash with soap and water.
  • Do not ingest. If swallowed, do not induce vomiting and seek medical advice immediately.
  • Use with adequate ventilation when working in confined areas.
  • Collect used grease and empty packaging for authorised recycling; never discharge into drains, soil or water.

Leave Your Message