KunLun KP-A General Purpose Lithium Based Grease No. 2 - 15 kg Pail
Features and Benefits
| Feature | Benefit |
|---|---|
| Good lubricity and load-carrying capacity | Keeps an effective lubricating film on rolling and plain bearings carrying normal to moderately heavy loads. |
| Excellent mechanical stability | The lithium soap structure stays firm under repeated working, so the grease does not soften or leak out. |
| Good water resistance | Continues to lubricate bearings and joints that come into contact with water or operate in damp conditions. |
| Effective rust and corrosion protection | Additives protect steel and bearing surfaces against rust and corrosion during service and storage. |
| Wide service temperature range | Covers -20 °C to 120 °C, making one grease suitable for most general mechanical equipment through seasonal changes. |
| Standard NLGI 2 consistency | The most common grease consistency, suited to grease-gun and manual application on rolling and plain bearings. |
Typical Data
| Parameter | Value | Test method |
|---|---|---|
| NLGI grade | 2 | GB/T 7324 |
| Product classification | ISO 6743-9 (GB 7631.8-90): L-XBCEA 2 | - |
| Product standard | GB/T 7324-2010 | - |
| Operating temperature range (°C) | -20 to 120 | GB/T 7324 |
| Thickener / base oil | Lithium soap thickened refined mineral oil with anti-oxidation and anti-rust additives | - |
| Worked penetration (0.1 mm) | 278 | GB/T 269 |
| Dropping point (°C) | 198 | GB/T 4929 |
| Shear stability, 100,000 strokes (0.1 mm) | 290 | GB/T 269 |
| Water washout (38 °C, 1 h) (%) | 1.55 | SH/T 0109 |
| Corrosion protection (52 °C, 48 h) | Qualified | GB/T 5018 |
| Packaging | 15 kg pail (0.8 kg can, 1 kg bag, 175 kg drum and bulk packing also available) | - |
Packaging and Storage
- Packed in 15 kg pails; 0.8 kg cans, 1 kg bags, 175 kg drums and bulk packing are also available on request.
- Store in a cool, dry and well-ventilated place and keep the container tightly closed to prevent moisture and impurities.
- Use clean, dedicated tools and containers; do not mix with greases of different thickeners or significantly different grades.
- Apply an appropriate amount of grease according to the equipment requirements and the manufacturer's recommendations.
- Clean the lubrication points before use to avoid contamination.
Notes
- Do not mix with greases of different thickeners or significantly different grades.
- Clean the lubrication points before use and avoid overfilling.
- Check bearings for abnormal temperature or noise after relubrication.
- Avoid prolonged or repeated skin contact; wear oil-resistant gloves and safety goggles.
- Dispose of empty packaging and used grease through licensed recyclers.
Health and Safety
- Use with adequate ventilation.
- Avoid prolonged or repeated skin contact; wear oil-resistant gloves.
- Avoid contact with eyes. In case of contact, wash thoroughly with plenty of water.
- Do not ingest. If swallowed, seek medical advice immediately.
- Refer to the product Safety Data Sheet (SDS) for full handling information.












