KunLun KP-A General Purpose Lithium Based Grease No. 3 - 15 kg Pail
Features and Benefits
| Feature | Benefit |
|---|---|
| Good lubricity and anti-wear performance | Protects rolling and sliding bearings, gears and other mechanical parts against wear under normal industrial loads. |
| Excellent mechanical and oxidation stability | The firm lithium soap structure resists softening, leakage and hardening, giving dependable service life. |
| Good water resistance and rust prevention | Keeps lubricating and protecting metal surfaces in damp conditions and where water contact occurs. |
| Wide service temperature range | Covers -20 °C to 120 °C, so one grease serves most general industrial equipment through seasonal changes. |
| Firm NLGI 3 consistency | Stays in place on vertical shafts, open gears and joints where a stiffer grease is preferred, and suits manual application. |
| Broad general equipment coverage | For the lubrication of rolling and sliding bearings, gears and other general mechanical parts in industrial equipment. |
Typical Data
| Parameter | Value | Test method |
|---|---|---|
| NLGI grade | 3 | GB/T 7324 |
| Product classification | ISO 6743-9 (GB 7631.8-90): L-XBCEA 3 | - |
| Product standard | GB/T 7324-2010 | - |
| Operating temperature range (°C) | -20 to 120 | GB/T 7324 |
| Thickener / base oil | Lithium soap thickened refined mineral oil with anti-oxidation and anti-rust additives | - |
| Worked penetration (0.1 mm) | 230 | GB/T 269 |
| Dropping point (°C) | 200 | GB/T 4929 |
| Shear stability, 100,000 strokes (0.1 mm) | 239 | GB/T 269 |
| Water washout (38 °C, 1 h) (%) | 0.8 | SH/T 0109 |
| Corrosion protection (52 °C, 48 h) | Qualified | GB/T 5018 |
| Storage period | 36 months from the date of manufacture when stored properly | - |
| Packaging | 15 kg pail (0.8 kg can, 1 kg bag, 175 kg drum and bulk packing also available) | - |
Packaging and Storage
- Packed in 15 kg pails; 0.8 kg cans, 1 kg bags, 175 kg drums and bulk packing are also available on request.
- Store in a cool, dry and well-ventilated place, away from direct sunlight and sources of heat.
- Keep the container closed and clean, and reseal it after use.
- Shelf life is 36 months from the date of manufacture when stored properly.
- Avoid mixing with other greases; use clean, dedicated tools and containers.
Notes
- Avoid mixing with other greases.
- Clean the bearing and the grease nipple before relubrication and avoid overfilling.
- Check bearings for abnormal temperature or noise after relubrication.
- Avoid prolonged or repeated skin contact; wear oil-resistant gloves and safety goggles.
- Dispose of empty packaging and used grease through licensed recyclers.
Health and Safety
- Use with adequate ventilation.
- Avoid prolonged or repeated skin contact; wear oil-resistant gloves.
- Avoid contact with eyes. In case of contact, wash thoroughly with plenty of water.
- Do not ingest. If swallowed, seek medical advice immediately.
- Refer to the product Safety Data Sheet (SDS) for full handling information.












